Operation - Denon AVR-2803S Operating Instructions Manual

[] OPERATION
Refer to "CONNECTIONS" (pages 6 to 13) and check that aft
connections are correct.
Select "AMP mode" using the TAPE, CDR/MR or CD
button. (only when operating with the remote control unit)
{Remote colltrol unit)
Turn on the power.
Press the POWER switch (button}.
ON 18T_DB_ ON/SOLIRCE
_ ON/STANDBy
_,O, Light
(Main unit} {Remote contlol un_tl
When pressed, the power turns on and the display lights. The sound
is muted for several seconds, after which the unit operates normally.
When pressed again, the power turns off, the standby mode is set
and the display turns off.
Whenever the ON/STANDBY button is in the STANDBY state, the
apparatus is still connected on AC line voltage. Please be sure to
unplug the cord when you leave home for, say, a vacation.
The front speakers switch as shown below each time the
FRONT SPEAKER button is pressed.
FRONT SPE#.J_R
FRONT
{Ma_n unJtl IRemote control unit}
_- FRONT A _ FRONT B
FRONT A+B _
C:I
3 4
3
2
®®d0
_- 4
L "¢'°=,_,_.
I
41