Part 1. Preinstallation Instructions; Unpacking And Inspection; Shipping Damage - Micromeritics TriStar II Plus Pre-Installation Manual

Hide thumbs Also See for TriStar II Plus:

Table of Contents

When the instrument is received, unpack and inspect the contents of the shipping carton(s). Use the

packing list to verify that all products, accessories, software, and documentation are received intact

and in the correct quantity. The shipping carton(s) and contents should be inspected within a couple of

days of receipt in the event damage or loss has occurred. See Shipping Damage below.

If equipment is damaged or lost in transit, you are required to make note of the damage or loss on the

freight bill. The freight carrier, not Micromeritics, is responsible for all damage or loss occurring dur-

ing shipment. If you discover damage or loss of equipment during shipment, report the condition to the

carrier immediately. Insurance claims MUST be made with the freight carrier, NOT Micromeritics.

DO:

• Keep all software, manuals, and accessories with the instrument.

• Keep all boxes and shipping cartons until the installation is complete.

• Report any shipping damage immediately to the carrier and follow their directions.

• Report missing or wrong parts to Micromeritics, in addition to any shipping damage, only after

filing a claim with the Carrier.

DO NOT:

• Ask Micromeritics to file a claim for shipping damage.

• Discard shipping boxes and containers until installation is complete.

Part 1. Preinstallation Instructions

TriStar II Plus Preinstallation Instructions and Checklist

303-42870-01 (Rev B) - Mar 2015

Table of Contents

Do you have a question about the TriStar II Plus and is the answer not in the manual?