Fcc Notice - 3D Systems Figure 4 Standalone User Manual

8/12/22, 10:32 AM

FCC Notice

United States
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in
accordance with these instructions, it may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his/her own expense.
Canada
CAN ICES-3 (A)/NMB-3 (A)
European Union
CAUTION: This is a Class A product. In a domestic environment, this product can cause
radio interference in which case the user could be required to take adequate measures.
Korea
사용자 안내문
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용 환경에서 사용하는 경
우 전파간섭의 우려가 있습니다.
Changes or modi cations to this equipment not approved by 3D Systems can void the authority of the
user to operate this equipment.
infocenter.3dsystems.com/figure4standalone/print/book/export/html/526
User Guide
3/236