Camera Outline And Interface; Camera Mechanical Connection With Adapter - TOUPTEK PHOTONICS ATR2110C User Manual

Table of Contents

Advertisement

3.3 Camera Outline and Interface

Item
1
2
3
4
5
6
7
8

3.4 Camera Mechanical Connection with Adapter

ATR2110C can be connected to a telescope with proper adapter, or the camera lens. The most common adapters are already
included in the package, but we also provide some specific adaptors based on the requirement.
The female flange to the sensor is 17.5mm. ATR2110C comes with M42x0.75 mount and can connect to telescope with the
M42x0.75 thread in a direct way.
ATR2110C can also connect to the telescope who use 1.25" or 2" eyepieces by M42M-1.25" or M42M-2" adapter. Figure
shows the connection of the camera and the adapter. After the adapter is screwed to the camera, the camera can insert into the
Figure 10 Camera Outline and Interface.
Table 8 Camera Outline and Interface List
Protective window, AR window for mono camera, IR-cut filter for color camera
M42F  0.75 thread
Thermal outlet or radiator
LED indicators: 1) Power LED. 2) System LED. 3)TEC LED. 4)Fan LED
DC 12V 3A power port, 5.5  2.1mm
Air inlet
USB 3.0/ USB 2.0 port
USB 2.0 HUB
ATR2110C(ATR3CMOS02300KPA) User Manual
Specification
14

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ATR2110C and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Atr3cmos02300kpa

Table of Contents