Table of Contents
Advertisement
SIM Card*
Insert SIM Card
Power off the handset, then unlock and remove the battery.
B
Carefully insert the SIM card into the SIM card slot indicated by the SIM card
C
symbol on the label in the battery compartment.
D
Push the SIM card into the slot until you hear a click.
The SIM card is properly inserted if it is fully aligned with the side of the
battery compartment.
Insert the battery and lock it in place. The handset can now be powered on.
E
Remove SIM Card
B
Power off the handset, then unlock and remove the battery.
C
Push the SIM card into the slot until you hear a click, then pull the SIM card out
to remove it.
Insert the battery and lock it in place. The handset can now be powered on.
D
* Not available in Wi-Fi only models.
ascom
11
© 2023 Ascom. All rights reserved. TD 93546EN / March 2024 / Ver. B
Charging Methods
To charge the handset, use one of the following charging methods:
— Desktop charger.
— Handset charging rack.
— USB-C cable.
To charge the battery separately from the handset, use a battery charging rack.
NOTE: A charging adapter is required.
Desktop Charger
B
Place the handset in the charging slot. Push the handset into the charger
to fully insert it. Once the handset is correctly inserted, the charging screen
appears showing the battery charge level.
C
When the green check mark icon appears on the screen and the LED turns
green, the battery is fully charged.
D
To disconnect the handset, tilt the handset towards you
handset upwards
to remove it from the charger.
C
ascom
and then lift the
B
© 2023 Ascom. All rights reserved. TD 93546EN / March 2024 / Ver. B
12
Advertisement
Table of Contents
Need help?
Do you have a question about the Myco 4 and is the answer not in the manual?
Questions and answers