Table of Contents
Advertisement
True Hot-Swap
Ascom Myco 4 has an easily replaceable battery that can be changed without
powering down the handset or exiting your active apps. With the hot-swap
functionality you can continue working and using your apps even when the battery
is being exchanged.
— When removing the battery, the handset is operational for another 60
seconds.
— If the battery is not replaced within 60 seconds, the handset powers off.
Low Battery
If the battery level is low, charge the battery, or change it to a fully charged one as
soon as possible.
A low battery level is indicated by a warning signal and the Turn
20%
on Battery Saver? notification.
10% – 2%
A very low battery level is indicated by a warning signal that
sounds at each battery percent change and the Turn on
Battery Saver? notification.
Tap Mute to silence the warning signal.
1%
An empty battery is indicated by vibration and a warning signal
that sounds every five seconds, and the Turn on Battery
Saver? notification.
Tap Mute to silence the warning signal.
NOTE: The vibration will stay on even if the handset is placed into
the Do not disturb / Silent mode.
ascom
9
© 2023 Ascom. All rights reserved. TD 93546EN / March 2024 / Ver. B
Battery Replacement
B
Slide the battery cover lock to the right to release the battery.
C
While pressing and holding the upper part of the clip
pull it out
.
D
D
Press and hold the clip once again. Insert a fully charged or new battery and
press it in.
E
Slightly press on the battery and slide the battery cover lock to the left to lock
the battery.
The battery is properly inserted if it is fully aligned with the handset body.
ascom
, lift the battery
B
C
© 2023 Ascom. All rights reserved. TD 93546EN / March 2024 / Ver. B
and
10
Advertisement
Table of Contents
Need help?
Do you have a question about the Myco 4 and is the answer not in the manual?
Questions and answers