Table of Contents
Advertisement
Quick Settings
The Quick Settings panel can be used to make some fast changes in your Ascom
Myco 4, such as altering the brightness of the screen or putting the handset in
battery save mode.
You can open the Quick Settings panel both in unlocked mode and on the lock
screen.
To see a selection of
settings, swipe down from
the top of the screen. The
settings are above the
Notification drawer.
ascom
7
To open the whole
To turn a setting on / off,
Quick Settings panel,
tap the corresponding
swipe down twice from
setting tile.
the top of the screen.
© 2023 Ascom. All rights reserved. TD 93546EN / March 2024 / Ver. B
Handset Security
Follow these recommendations to ensure that the handset is accessible by the
intended personel only:
— Lock the device (turn off the screen) before leaving it unattended.
— Avoid changes in any settings that may degrade security, for example
increasing the screen timeout.
— Use one of the following screen lock methods: pattern, PIN, or password.
Change Screen Lock
To change the screen lock method, go to the All apps screen and tap Settings
Then tap Security → Screen lock. Choose one of the following:
— Pattern to draw a pattern to unlock the handset.
— PIN to enter a PIN code to unlock the handset.
— Password to enter a password to unlock the handset.
ascom
© 2023 Ascom. All rights reserved. TD 93546EN / March 2024 / Ver. B
.
8
Advertisement
Table of Contents
Need help?
Do you have a question about the Myco 4 and is the answer not in the manual?
Questions and answers