Xylem SI Analytics ViscoClock plus Operating Manual page 66

66
7 Guarantee
We provide guarantee for the device described for two years from the date of purchase. This
guarantee covers manufacturing faults being discovered within the mentioned period of two years.
Claim under guarantee covers only the restoration of functionality, not any further claim for damages
or financial loss. Improper handling/use or illegitimate opening of the device results in loss of the
guarantee
The guarantee does not cover wear parts, as lobes, cylinders, valves and pipes including the thread
connections and the titration tips. The breach of glass parts is also excluded. To ascertain the
guarantee liability, please return the instrument and proof of purchase together with the date of
purchase freight paid or prepaid.
8 Storage and transport
If the ViscoClock plus is intended to be stored intermediately or transported again, the original
packaging will provide the best conditions to protect the devices. However, in many cases, this
packaging is no longer available, so that a similar packaging must be created. Sealing of the unit in foil
is advantageous here. The devices should be stored in a room with a temperature between + 10 and +
40°C and the (relative) humidity should not exceed 70% (rel.).
9 Recycling and disposal
Please observe the applicable local or national regulations concerning the disposal of "waste
electrical and electronic equipment".
The ViscoClock plus and his packaging are manufactured as far as possible from materials which can
be disposed of environmental-friendly and recycled in a technically appropriate manner. If you have
any question regarding disposal, please contact the service (see backside of this manual).
The main printed board carries a lithium battery. Batteries should not to be disposed of with the
normal domestic waste. They will be taken back and recycled or disposed of properly by the
manufacturer at no cost.
EC – Declaration of Conformity
10
The corresponding declaration of conformity of the device can be found on our homepage. It will also
be made available to you on request.
11 Accessories and Spare Parts
11.1 Accessories
Manual pump set "push"
VZ 6550
Manual pump set "suction"
VZ 6554
TZ 1858 All voltage plug power supply 100 - 240 V ~ 9 V / DC, 550 mA
TZ 1852 Primary adapter for TZ 1858, for UK
TZ 1854 Primary adapter for TZ 1858, for Australia
TZ 3863 Thermal printer
TZ 3864 Printer paper for TZ 3863, very high durability (5 rolls)
VZ 6570 USB OTG adapter cable (mini B plug on USB A socket)
CT 72/...
Transparent thermostats of the CT 72 series (CT 72/P, CT 72/2, CT 72/4)
11.2 Spare parts
VZ 6551 Silicone plugs (8), 5 ea.
VZ 6572 Silicone cap (10) for ventilation tube, including connection hose, 1 ea.
alternatively: VZ 5101 Silicone cap () for ventilation tube, including connection hose, 1 ea.
VZ 6556 Replacement glass tube (28) for manual pump VZ 6550 or VZ 6554
rights.