Launch PRO3S+ Manual page 68

LAUNCH
1. Check the box "Use Wi-Fi communication mode", the system will search for
VCI module automatically.
2. Tap the target VCI to pair. Once the pairing is successfully done, the screen
displays:
3. There are two Wi-Fi communication modes available for the VCI module.
 Work in Wi-Fi hotspot: Once enabled, the VCI module and the tablet
automatically connect and form a LAN network to make communication. In
this case, the tablet cannot surf the Internet.
 Work in network adaptor: Once enabled, input the Wi-Fi network name and
access password (if the network is encrypted) until it is properly connected.
In this case, the tablet can surf the Internet and communicate with the VCI
module.
Note: please be sure to keep the VCI powered on while performing the operation.
4. Activate VCI
This item lets you activate a new VCI.
Input the Serial Number and Activation Code, and then tap Activate to activate
it.
5. Firmware Fix
Use this item to upgrade and fix VCI firmware/system. During fixing, please do
60