Diagnose; Automatic Diagnosis - Launch Pro3S+ Manual

LAUNCH

5 Diagnose

5.1 Automatic Diagnosis

Through simple wireless communication between the tablet and VCI, you can
quickly scan all available systems of the currently identified vehicle. Once the
automatic detection is successfully performed, the system will directly output the
scan result.
Notes:
• Before using this function, please make sure the VCI is properly connected to the
vehicle's DLC port. For detailed connection, see Chapter 4.2.
• A stable network connection is required for this function.
Follow the steps below to proceed.
1. Tap Automatic Diagnosis, choose the desired vehicle region on the popup,
the following screen will appear.
2. After the vehicle manufacturer region is selected, the system will
automatically decode the vehicle information.
If the system fails to decode the vehicle, the following popup will appear on
the screen. Enter the 17-digit VIN manually to start scanning.
20