Initial Use; Charging & Turning On; Basic Gestures - Launch Pro3S+ Manual

LAUNCH

2 Initial Use

2.1 Charging & Turning On
1. Plug one end of the included charging port of the tablet, and the other end to
the power adaptor.
2. Connect the other end to the AC outlet to start charging. After the tablet is
fully charged, unplug the power adaptor from the tablet.
Caution: Please use the included power adaptor to charge your tool. No
responsibility can be assumed for any damage or loss caused as a result of using power
adaptors other than the one supplied.
Note: If it is the first time you have used this tool or the tool remains idle for a long
period of time, the tool could fail to turn on. Please charge the tool for a minimum of 5
minutes and attempt to turn on again.
Press [POWER] to turn the tool on. Press [POWER] for 3 seconds, an option
menu will pop up on the screen. Tap Power off to turn the tool off.

2.2 Basic Gestures

Single-tap: To select an item or launch a program.
Double-tap: To zoom in so that the text on a webpage appears in a
column that fits your device's screen.
Long press: Tap and hold on the current interface or area until a
contextual menu pops up on the screen, and then release it.
Slide: To jump to different pages.
Drag: Tap the application icon and drop it to other location.
11