J2534 Reprogramming (Only For Smartlink C V2.0 Edition) - Launch Pro3S+ Manual

LAUNCH
9 J2534 Reprogramming (Only for SmartLink C V2.0
Edition)
Flash programming has become a common and profitable procedure in the
repair and service of today's vehicles. Reprogramming is often the only solution
for problems ranging from driveability and loss of power to poor fuel economy
and emissions related issues. SmartLink C V2.0 makes it easy. The SmartLink C
V2.0 is a communication interface designed to support J2534 specifications for
ECU reprogramming.
Except that the SmartLink C V2.0 can act as a VCI device and a SmartLink
dongle, it also can be used as a J2534 PassThru device, working together with
the PC installed with the OEM diagnostic software to perform the J2534
reprogramming. In this case, the PC needs to install with the LAUNCH's J2534
tool, which can be downloaded from the official website at www.cnlaunch.com.
68