Clear Fault Code - Launch Pro3S+ Manual

LAUNCH
saved the diagnostic report. All vehicle and workshop information will be appended as
tags on the diagnostic report.
To ignore the workshop information, tap Skip to go to the report details screen.
On the report details screen, tap Save to save it. All reports are saved in More
-> Common -> Personal center -> My Report -> Health Reports. For details
on report operations, please refer to Chapter 9.1.1.

5.2.3 Clear Fault Code

This function enables you to erase the codes from the vehicle after reading the
retrieved codes from the vehicle and certain repairs have been carried out.
Before performing this function, make sure the vehicle's ignition key is in the ON
position with the engine off.
Clearing DTCs does not fix the problem(s) that caused the code(s) to be set. If
proper repairs to correct the problem that caused the code(s) to be set are not
made, the code(s) will appear again and the check engine light will illuminate as
soon as the problem that cause the DTC to set manifests itself.
On the diagnostic function selection screen, tap Clear Fault Code, a
confirmation dialog box will appear.
26