How To Set Up And Control The Unit - JB Systems POWERBALL COLOR Operation Manual

ENGLISH
• Don't cover any ventilation openings as this may result in overheating.
• The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.

HOW TO SET UP AND CONTROL THE UNIT

You can operate the unit in several ways:
1) FULL AUTOMATIC STANDALONE MODE:
The effect automatically runs a preprogrammed sequence. Select this mode when only 1 POWERBALL
unit is used (standalone) or when the unit is placed as the first (master) unit in a chain with several
POWERBALL units in Master/Slave mode (see below).
There are different types of standalone modes:
Automatic show mode: this is how to select one of the preprogrammed shows
• Press the [MENU] button until the display shows [Prog].
• Press the [ENTER] button to enter.
• Press the [MENU] button until the display shows [Auto].
• Press the [ENTER] button to enter the setup.
• Use the [UP] and [DOWN] buttons to select fade mode [FAdE] or color jump mode [JuhP]
• Press the [ENTER] button to confirm.
• Use the [UP] and [DOWN] buttons to select the speed of the program (S.1 to S.100)
• Press the [ENTER] button to confirm.
Color mode: used to select a preset of colors:
• Press the [MENU] button until the display shows [CoLo].
• Press the [ENTER] button to enter the setup..
• Use the [UP] and [DOWN] buttons to select the desired color preset [C1] to [C15]
• Press the [ENTER] button to confirm.
Manual Color mode: used to manually set the intensity of each color :
• Press the [MENU] button until the display shows [MAnU].
• Press the [ENTER] button to enter the setup. The display shows a value from [R.000] to [R.255].
• Use the [UP] and [DOWN] buttons to set the intensity of the Red color
• Press the [ENTER] button to enter the setup. The display shows a value from [G.000] to [G.255].
• Use the [UP] and [DOWN] buttons to set the intensity of the Green color
• Press the [ENTER] button to enter the setup. The display shows a value from [B.000] to [B.255].
• Use the [UP] and [DOWN] buttons to set the intensity of the Blue color
• Press the [ENTER] button to enter the setup. The display shows a value from [U.000] to [U.255].
• Use the [UP] and [DOWN] buttons to set the intensity of the White color
• Press the [ENTER] button to confirm.
ROTATION: when you have selected one of the programs above, you can set rotation speed manually.
• Press the [MENU] button until the display shows [ rot].
• Press the [ENTER] button to enter the setup..
• Use the [UP] and [DOWN] buttons to select left rotation, right rotation, no rotation [StoP] or automatic
rotation (combination of right and left rotation)
• Press the [ENTER] button
• Use the [UP] and [DOWN] buttons to select the rotation speed [S 0] to S100]
2) SOUND CONTROLLED STANDALONE MODE:
The POWERBALL runs a preprogrammed sequence to the rhythm of the music. Select this mode when
only 1 POWERBALL is used (standalone) or when the POWERBALL is placed as the first (master) unit in
a chain with several units.
• Press the [MENU] button until the display shows [Snd].
• Press the [ENTER] button: The display shows [Sound]
• Press the [ENTER] button again if you want to set the sound sensitivity of the internal microphone:
• Use the [UP] and [DOWN] buttons to set the sound sensitivity of the internal microphone [u.7] to [u.100]
• Press the [ENTER] button to confirm.
JB SYSTEMS® 4/9
USER MANUAL
POWERBALL COLOR