ENGLISH USER MANUAL OPERATION MANUAL ® Thank you for buying this JB SYSTEMS product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. FEATURES ...
When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced. The mains cables must be in impeccable condition and should be replaced immediately when even a small problem is detected. JB SYSTEMS PARTY SPOT ®...
4. Mains output with IEC socket: you can use a special Male/Female IEC power cable to connect this output with the mains input of the next Party Spot for easier linking up to 10A. you can also use our [JB Systems Combi Cable] to link power and dmx signal with one cable.
Press the MENU button until Axxx (A followed by 3 numbers) is shown on the display. Use the DOWN and UP buttons to change the DMX address. Once the correct address is shown on the display, press the ENTER button to confirm. JB SYSTEMS PARTY SPOT ®...
Page 7
Press the [MENU] button until o… (o followed by 3 numbers) is shown on the display Use [DOWN] and [UP] buttons to change the intensity of the White color (000=minimum, 255=maximum). Press [ENTER] to confirm JB SYSTEMS PARTY SPOT ®...
DMX Chart for the 6 channel DMX-Mode Standard mode. Channel: Value: Function: 000-255 Master dimmer (0-100%) 000-006 Strobe OFF 007-255 Strobe (slow to fast) 000-255 Red (0-100%) 000-255 Green (0-100%) 000-255 Blue (0-100%) 000-255 White (0-100%) JB SYSTEMS PARTY SPOT ®...
7x 4-in-1 LEDs (Red, Green, Blue, White) Beam angle: ± 40° Size: 190x190x140mm Weight: 1 kg All the information is subject to change without prior notice You can download the latest version of this user manual on our website: www.jb-systems.eu JB SYSTEMS PARTY SPOT ®...