Maintenance; Specifications - JB Systems POWERBALL COLOR Operation Manual

ENGLISH
▪
▪
o
[rESt] = Factory Reset. This function can be used to reset all the settings of the unit to the
original factory settings
▪
▪

MAINTENANCE

• Make sure the area below the installation place is free from unwanted persons during servicing.
• Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
• All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
• Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
• When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
• The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
• In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
• The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
• The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics.
• Clean with a soft cloth using normal glass cleaning products.
• Always dry the parts carefully.
• Clean the external optics at least once every 30 days.
• Clean the internal optics at least every 90 days.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!

SPECIFICATIONS

This device carries the prescribed CE marking. It was tested for this purpose in a specialized CE lab and fully
complies with all currently valid European and national standards.
The corresponding CE conformity declarations can be found on the product page of this product on our
website.
Mains Input:
Fuse:
Max. Total Power consumption:
Sound Control:
DMX connections:
DMX channels:
LED power:
Working temperature:
Dimensions:
Weight:
You can download the latest version of this user manual on our website:
JB SYSTEMS®
Press the [ENTER] button to enter the option settings
Use the [UP / DOWN] button to select the desired mode:
•
ON = IR remote receiver activated.
•
OFF = IR remote receiver deactivated.
Use the [UP / DOWN] button to confirm if you want to do the reset or not
•
YES = the reset will be executed as soon as you press the [ENTER] button.
Press the [ENTER] button.
AC 100~240V, 50/60Hz
250V 2A slow blow (20mm glass)
200W
Internal microphone
3pin XLR male / female
1, 3, 4 or 10 channels
200 W
20x 10 Watt Led's (5x Red + 5x Green + 5x Blue + 5x White)
10°C to 40°C
242 x 242 x 275mm
4.65kg
All the information is subject to change without prior notice
9/9
USER MANUAL
www.jb-systems.eu
POWERBALL COLOR