How To Set Up And Control The Unit - JB Systems USB PARTYSET Operation Manual

ENGLISH
procedure in the user manual supplied with the WTR-DMX DONGLE from BRITEQ
WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: 4645)
14. MAINS INPUT: IEC socket with integrated fuse holder and switch, connect the supplied mains cable
here. Always replace the fuse with a fuse that is 100% identical. (1.6A – 250V Slow)

HOW TO SET UP AND CONTROL THE UNIT

Once the effects are installed and connected to the bar via the USB connectors you can operate the
unit in several ways:
1) FULL AUTOMATIC STANDALONE MODE:
The effect automatically runs a preprogrammed sequence. Select this mode when only 1 USB Partyset is
used (standalone) or when the USB Partyset is placed as the first (master) unit in a chain with several
USB Partysets.
• Press the [MENU] button until the display shows [Aut].
• Press the [ENTER] button to confirm your choice.
• Now you can use the UP or DOWN buttons to select the desired effect group:
o
[AutM] Automatic mixed effects show.
▪
▪
▪
▪
▪
o
[AutP] Automatic Program. (Selection of one particular program)
▪
▪
▪
▪
▪
▪
▪
You can connect several USB PARTYSETs together: just put the first unit of the chain in one of the
automatic effect modes and all other units in "Slave mode" (display shows "SLA") to make them all work in
perfect synchronicity !
2) SOUND CONTROLLED STANDALONE MODE:
The Partyset runs a preprogrammed sequence to the rhythm of the music. Select this mode when only 1
Partyset is used (standalone) or when the Partyset is placed as the first (master) unit in a chain with
several units.
• Press the [MENU] button until the display shows [Sou].
• Press the [ENTER] button to confirm your choice.
• Now you can use the UP or DOWN buttons to select the desired effect group:
o
[SouM] Sound controlled mixed effects show.
▪
▪
▪
▪
▪
o
[SouP] Sound controlled program. (Selection of one particular program)
▪
▪
▪
▪
▪
JB SYSTEMS®
Press [ENTER] to select this mode.
Use the [UP] and [DOWN] buttons to select one of the 3 shows [AM01 – AM03]
Press [ENTER] to confirm your setting
Use the [UP] and [DOWN] buttons to select the desired show speed from [S.01]
slow to [S.99] fast
Press [ENTER] to confirm your setting
Press [ENTER] to select this mode.
Use the [UP] and [DOWN] buttons to select one of the 18 programs [AP01 – AP18]
Press [ENTER] to confirm your setting
Use the [UP] and [DOWN] buttons to select the desired program speed from [S.01]
slow to [S.99] fast
Press [ENTER] to confirm your setting
Use the [UP] and [DOWN] buttons to select the desired motor speed from [M.00] =
STOP to [M.99] = fastest (only needed if you use effects with a rotation motor)
Press [ENTER] to confirm your setting
Press [ENTER] to select this mode.
Use the [UP] and [DOWN] buttons to select one of the 3 shows [SM01 – SM03]
Press [ENTER] to confirm your setting
Use the [UP] and [DOWN] buttons to set the desired sensitivity for the microphone
from [u.00] microphone OFF to [u.99] high sensitivity
Press [ENTER] to confirm your setting
Press [ENTER] to select this mode.
Use the [UP] and [DOWN] buttons to select one of the 18 shows [SP01 – SP18]
Press [ENTER] to confirm your setting
Use the [UP] and [DOWN] buttons to set the desired sensitivity for the microphone
from [u.00] microphone OFF to [u.99] high sensitivity
Press [ENTER] to confirm your setting
4/12
USER MANUAL
®
. The separate
USB PARTYSET