ENGLISH USER MANUAL OPERATION MANUAL ® Thank you for buying this JB Systems product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. FEATURES •...
• Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from epilepsy. JB SYSTEMS 2/19 CHALLENGER BSW ®...
7. [POWER OUT]: used to daisy chain the power to several other fixtures. Always pay attention to the maximum load while adding fixtures! Special combi cables (power + DMX XLR-cables) are available: see our website! JB SYSTEMS 3/19 CHALLENGER BSW ®...
7. P/T Macro 8. P/T Macro Speed 9. Color 10.Gobo1 View DMX Value 11.Gobo2 12.RGobo2 13.Focus 14.Prism 15.Rprism 16.Zoom 17.Shutter 18.Dimmer 19.Dimmer Fine 20.Special Function show 1 Show Settings Show Chase show 2 show 3 JB SYSTEMS 4/19 CHALLENGER BSW ®...
Page 7
2. Pan Fine 3. Tilt 4. Tilt Fine 5. P/T Speed 6. Show Mode 7. P/T Macro Fixture Test 8. P/T Macro Speed Manual Test 9. Color 10.Gobo1 11.Gobo2 12.RGobo2 13.Focus 14.Prism 15.Rprism 16.Zoom JB SYSTEMS 5/19 CHALLENGER BSW ®...
Page 8
Shows the value of each function of the fixture on every moment. Used for problem solving. • Press the [MENU] button to access the different functions in the menu. • Press the ▲/▼ buttons until the desired function is showing on the display. JB SYSTEMS 6/19 CHALLENGER BSW ®...
Page 9
• Press the [MENU] button to access the different functions in the menu. • Press the ▲/▼ buttons until the desired function is showing on the display. • Press the [ENTER] button: the values can be changed JB SYSTEMS 7/19 CHALLENGER BSW ®...
Page 10
• Press the ▲/▼ buttons until the desired function is showing on the display. • Press the [ENTER] button: the brightness of the backlight can be set from 000 to 010. • Use ▲/▼ buttons to select the desired value. • Press the [ENTER] button to confirm. JB SYSTEMS 8/19 CHALLENGER BSW ®...
Page 11
• Press the ▲/▼ buttons until the desired function is showing on the display. • Press the [ENTER] button: the display shows [Effect] • Press the [ENTER] button again to start resetting the effect functions. JB SYSTEMS 9/19 CHALLENGER BSW ®...
• Just insert the mains cable. The unit starts working immediately in stand-alone mode. Electrical installation for two or more units in master/slave: In this mode the units will show a synchronized show, working to the rhythm of the beat. JB SYSTEMS 10/19 CHALLENGER BSW ®...
Page 13
DMX channel they use. DMX-CONFIGURATION OF THE [CHALLENGER BSW] IN 5, 17 AND 20CH MODE: 5 CHANNEL MODE :...
• Clean the external optics at least once every 30 days. • Clean the internal optics at least every 90 days. Attention: We strongly recommend internal cleaning to be carried out by qualified personnel! JB SYSTEMS 18/19 CHALLENGER BSW ®...
Operating temperature (T 0°C to 40°C Size: 45,2x29x25,6cm (LxBxH) Weight: 12 kg Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www.jb-systems.eu JB SYSTEMS 19/19 CHALLENGER BSW ®...