Supplied Accessories; Optional Accessories - Lectrosonics DCHR Instruction Manual

Supplied Accessories

A1B1
B1C1
AMJ19
Swiveling Whip Antenna with Standard SMA Connector,
Block 19.
AMJ22
Antenna with swiveling SMA connector, Block 22.
AMJ25
Swivelling Whip Antenna with Standard SMA Connector,
Block 25. Shipped with B1C1 units only.
40073 Lithium Batteries
DCHR is shipped with two (2) batteries. Brand may vary.
26895
Replacement wire belt clip.
Rio Rancho, NM
Ships With
(2) AMJ19; (2) AMJ22
(2) AMJ22; (2) AMJ25

Optional Accessories

21926
USB cable for firmware updates
MCTA5TA3F2
TA5F mini locking female XLR
to dual TA3F mini locking
XLRs, for two channels of
analog audio from DCHR.
LRSHOE
This kit includes the accessories needed to mount the
DCHR on a standard cold shoe, using the wire belt clip
that comes with the receiver.
DCHRCVR
This tough silicone cover protects the DCHR from
moisture and dust. The pliable material and the two-part
design make it easy to install and remove. Cutouts for
the antennas and jacks and the raised dome for the LED
provide a snug fit.
AMJ(xx) Rev. A
Whip antenna; swiveling. Specify frequency block
(see following page).
Digital Camera Hop Receiver
13