Supplied And Optional Accessories - Lectrosonics M2R Instruction Manual

Supplied Accessories
35854
Hex key wrench for tightening screws on volume knob
40073 Lithium Batteries
DCHR is shipped with two (2) batteries. Brand may
vary.
35983 Case Insulating Pad
Two (2) foam pads for M2R.
Optional Accessories
26895
Wire belt clip.
21926
USB cable for firmware updates
Rio Rancho, NM
LRSHOE
This optional kit includes the accessories needed to
mount the M2R on a standard cold shoe using the wire
belt clip that comes with the receiver.
P1291
USB port dust cover.
LTBATELIM
Battery Eliminator for LT, DBu and DCHT
transmitters, and M2R; camera hop and similar
applications. Optional power cables include: P/N 21746
right angle, locking cable; 12 in. length P/N 21747 right
angle, locking cable; 6 ft. length; DCR12/A5U universal
power supply for AC power.
M2RCVR
This tough silicone cover protects the M2R from mois-
ture and dust. The pliable material and the two-part
design make it easy to install and remove. Cutouts for
the antennas and knob and the raised dome for the
LED provide a snug fit.
Digital IEM Receiver
15