Page 1
Vigo Bedside Table igo Bedside Table Thank you for purchasing a Mocka . Please follow the manufacturer’s assembly instructions in detail to ensure the safety features of the table i not compromised. WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e.
Page 2
Attach panels [3], [4] and [5] together using 4x bolts (A) and secure 1x slide rail (E3) to panel [4] using 2x 12mm screws (C). Tighten with a using 4x locking nuts (A). Tighten with a flathead screwdriver. screwdriver. mocka.co.nz I mocka.com.au...
Page 3
Attach panel [1] to panels [3], [4] and [5] using 4x dowels (F) and 6x bolts (A). Secure the bolts with 2x locking nuts (A) and 4x 50mm bolts (A). Secure with 6x locking nuts (A) and tighten with a flathead screws (D). Tighten with a screwdriver. screwdriver. mocka.co.nz I mocka.com.au...
Page 4
Attach panel [2] to the legs using 2x bolts (A) and secure with 2x securing the 2x safety straps (I) to the top as shown. Tighten with a locking nuts (A) and 4x 25mm screws (B). Tighten with a screwdriver. screwdriver. mocka.co.nz I mocka.com.au...
Page 5
(C). Attach 1x slide rail (E4) to panel [10] and secure with 2x 12mm base of the drawer. Attach panel [8] using 4x bolts (A) and secure with screws (C). Tighten with a screwdriver. the 4x locking nuts (A). Tighten with a flathead screwdriver. mocka.co.nz I mocka.com.au...
Page 6
Lift the furniture into the desired position, do not drag. Attach the other and easily along the rails. end of the safety straps (I) to the wall using 2x wall plugs (H) and 2x 25mm screws (G). Tighten with a screwdriver. All done, enjoy! mocka.co.nz I mocka.com.au...
Need help?
Do you have a question about the Vigo and is the answer not in the manual?
Questions and answers