Advertisement
Quick Links
Vibe/Olsen Tallboy
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
C
A
B
locking
dowel
nut x26
bolt
x22
x26
F
G
H
small
stopper
screw x5
x5
long
screw x4
Hardware Supplied
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
V
D
E
safety
strap x1
bolt
long
x12
X
screw x20
I
J
K
wall
anchor
x1
wedge
screw
allen
x4
x4
key
x1
washer
Wall Strap
W
WARNING:
Any furniture that is not
anchored to a wall has the potential to tip
screw
over in certain circumstances, i.e. if a
x1
child attempts to climb up on the
furniture
or
in
earthquake. Accordingly, we recommend
Y
that all furniture is anchored to a wall.
We supply a free safety wall anchor with
all furniture sold and we recommend
these are used to prevent your product
tipping. The fixing device provided
should fit most wall types, but please
wall
note that different wall materials may
screw
require different fixing devices from
x1
those supplied.
Z
x2
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
the
event
of
an
1
Advertisement
Related Manuals for Mocka Vibe/Olsen Tallboy
Summary of Contents for Mocka Vibe/Olsen Tallboy
- Page 1 *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. use of a power drill on a low-speed setting. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 2 Vibe/Olsen Tallboy Assembly Instructions Insert 4x bolts (A) and 4x dowels (C) into panel [1]. On panels [2] and [3] insert 2x bolts (A) and 14x dowels (C) as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 Attach 3x panels [11] and [12] to panel [2] and secure with 1x locking nuts (B) . with 4x small screws (F). Tighten with a screwdriver. Tighten with a screwdriver. Now attach panel [3]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 4 Attach 1x stopper (G) to the underside of panel [4] with 1x small screw Tighten with a screwdriver. Slide back panel [5] down the sides of panels (F). Tighten with a screwdriver. [2] and [3] in between the grooves. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 5 Insert 4x dowels (C) into the top of side panels [2] and [3]. Attach with an Allen key (K). panel [4] to the main unit with 4x long screws (H) and tighten with a screwdriver. mocka.co.nz | mocka.com.au mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 6 (A) and 4x locking nuts (B). Slide panel [10] in to place using the grooves between the side panels [8] and [13] . Secure panel [9] onto the side panels with 4x long screws (D). Repeat for the remaining drawers. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 7 (V) to the wall using 1x screw (Y), 1x wall plug (X) and 1 x washer (Z). Tighten with a screwdriver. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Vibe/Olsen Tallboy and is the answer not in the manual?
Questions and answers