Example Of Usage - Omron ZFX-C Command Reference Manual

Smart sensor

Hide thumbs Also See for ZFX-C:

Table of Contents

Example of Usage

The following describes an example procedure to communicate by non-procedural commands using Windows

standard tool HyperTerminal.

Start up HyperTerminal.

HyperTerminal is located under [Program]-[Accessory]-[Communication].

1-1

Enter an appropriate project name, and select OK.

1-2

Select the COM port connected to the ZFX-C in the Connect using field.

Example of Usage

ZFX-C Serial Communication Command Reference

Table of Contents