Specifications; Appendix E Specifications - Omron WT30 Operation Manual

Ratings
Item
Power supply Rated voltage
(wireless com-
Allowable volt-
munications
age range
power supply)
Power con-
sumption
Output/error Rated voltage
output power
Allowable volt-
supply
age range
(for output cir-
cuits)
Insulation resistance
Dielectric strength
Noise immunity
Vibration resistance (See note.)
Shock resistance
Ambient operating temperature
Ambient operating humidity
Ambient environment
Storage temperature
Protective structure
Terminal con- Power supply/
struction I/O terminal
Serial
Safety standards
Weight
Number of EEPROM overwrite
operations
Note Use the WT30-FT003 Surface Mounting Bracket when installing the WT30 in environments subject to
vibration.
Appendix E

Specifications

WT30-M01-FLK
Serial Master
24 VDC
20.4 to 26.4 VDC
3 W max.
---
---
20 MW min. (at 100 VDC) between the
power supply and all the parts.
1,500 VAC for 1 min between the power
supply and all the parts
IEC61000-4-4. 1 kW (power supply line)
Conforms to JIS C0040
Frequency: 10 to 55 Hz; Amplitude of 0.35 mm or acceleration of 50 m/s
is smaller (DIN Rail mounting: single-amplitude of 0.1 mm or acceleration of 15 m/s
10 sweeps of 8 min each (i.e., 80 min in total) in X, Y, and Z directions
Conforms to JIS C0041: 300 m/s
−10 to 55°C (with no icing or condensa-
tion)
(with the Terminal mounted with the dust-
proof label facing up)
25% to 85% (with no icing or condensation)
No corrosive gases
−25 to 65°C (with no icing or condensation)
IP20
Screwless terminal block
(Phoenix Contact FFKDS/V1-5.08 or equivalent)
D-sub, 9-pin (female)
Inch screws
(OMRON XM2F-0910-132 or equivalent)
UL: UL508 (Listing)
330 g max.
Approximately 1,000,000 operations
WT30-SID16/SMD16/SMD16-1
I/O Slaves
24 VDC
20.4 to 26.4 VDC
20 MW min. (at 100 VDC) between the
power supply and all I/O and I/O power
supply and between the power supply
and chassis
1,500 VAC for 1 min between the power
supply and all I/O and I/O power supply
and between the power supply and chas-
sis
2
3 times each in X, Y, and Z directions
Number of simultaneously ON I/O points
10 max.: −10 to 55°C
16 max.: −10 to 50°C
(with no icing or condensation)
(with the Terminal mounted with the dust-
proof label facing up)
---
2
, whichever
2
)
103