Dreadbox Murmux Adept Edition Operation Manual page 26

SETUP MENU
Entering Setup Menu will access the global parameters of the Murmux.
●
Press the Encoder to enter the MENU page.
●
Rotate the Encoder and scroll to Setup parameter.
●
Press the Encoder to enter Setup Menu.
●
Rotate the Encoder to scroll through the Setup parameters.
●
Press the Encoder to select a Value or to move to the next parameters page as seen on
the Table. Navigate back by pressing the BACK button.
AUTOTUNE
Performs an Auto-tuning for the voices. Once you have selected the Autotune parameter,
press the Encoder to start the Autotune procedure. Autotune will tune both the Oscillators
and the Filters, for proper keyboard tracking.
MIDI
Press the Encoder to select MIDI. Scroll through and press the Encoder to enter in one of
the following settings:
CHANNEL: Selects the MIDI channel. The selection can be OMNI (responds to all MIDI
channels) or 1 to 16 or MPE (activates the MPE support).
CC: Turns ON/OFF the CC In and CC Out MIDI messages.
The Control Change Messages can be used to control the unit externally via a MIDI
controller. Accordingly, one can use CC out to control another instrument or possibly
an editor for the instrument itself.
PC: Turns ON/OFF the Program Change In and Program Change Out MIDI messages.
The Program Change messages can be used to change the preset loaded externally.
Accordingly, one can use PC out to control another instrument or possibly an editor for the
instrument itself.
FINE TUNE
Adjusts the Master Tune of the Murmux from -99 to 99 with a range of ±4 semitones.
PITCH WHEEL
Adjusts the range of the Pitch Wheel from 0 to 12 semitones or from 0 to 48 for MPE.
26