Creating The Sample Data; Starting Up The Support Tool; File - New; Setting The Pt Configuration - Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Creating the Sample Data

9-3

Creating the Sample Data

Reference: The explanation in this section assumes that the default value of each object's

9-3-1 Starting up the Support Tool

9-3-2 File – New

9-3-3 Setting the PT Configuration

360
Creating the Alarm Screen
Create new screen (screen No. 4)
Set properties for screen No. 4
Create screen title
Create alarm list
Create [Menu] button
Create [Set] button
Create [Monitor] button
Create alarm library data
Create numeric keys for pop-up window display
Save the created data
Download the created data
This section describes the operational procedure and data creation procedure
step by step according to the operation flow shown in 9-2 Operation Flow.
property is not changed since installation.
At the start-up screen of Windows, double click the Support Tool icon to start the
Support Tool. (Refer to 3-1 Starting-up and Exiting the Support Tool.)
Select [File] in the main menu, then select [New] to create a new file.
(Refer to 3-3-1 Creating New Screen Data (Application) File.)
At the PT configuration setting dialog box, set the items as shown below.
(Refer to 3-3-1 Creating New Screen Data (Application) File.)
Section 9-3