Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 371

Example Screen Configuration
Set Screen
S Numeral Input 1
Used to set the data at two words, DM0010 and DM0011, in the PC (PLC).
When you touch the numeral display area, numeric keys are displayed (pop-up
window), allowing you to input the data.
S Numeral Input 2
Used to set the data at two words, DM0012 and DM0013, in the PC (PLC).
When you touch the numeral display area, numeric keys are displayed (pop-up
window), allowing you to input the data.
S Thumbwheel
Used to set the data at DM0014 in the PC (PLC).
S String Display, Auto./Man./Step/Reset
When you touch any of the [Auto.], [Man.], [Step], and [Reset] buttons, the fol-
lowing character string is displayed in the [String Display] filed.
[Auto.] button: Automatic
[Man.] button: Manual
[Step] button: Step
[Reset] button: Reset
S Start
This is a momentary type button.
When you touch this button, L000100 in the PC (PLC) goes ON.
If L000200 in the PC (PLC) goes ON, the button lights.
S Stop
This is a momentary type button.
When you touch this button, L000101 in the PC (PLC) goes ON.
If L000201 in the PC (PLC) goes ON, the button lights.
S Menu
This is a screen switching button.
When you touch this button, the screen switches to the Menu Screen (screen
No. 1).
S Monitor
This a screen switching button.
Section 9-1
355