Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 59

User Interface
Floating palette
Screen Element
(Selected item)
Fixed Display Object
Fixed Display-Mark
Fixed Display-Image
Fixed Display-Library
Image Lamp
Standard Lamp
Touch Switch
Status Bar:
Standard Toolbar:
Draw Bar:
Utility Bar:
Alignment Bar:
Each time you select the item, display/no-display selection changes alternately.
The check mark, if displayed, indicates that the selection of the corresponding
item is to be displayed.
If [Auto hide] invoked by selecting [Start] button (Windows)
[Taskbar] [Taskbar Options] is checked, status bar may not be displayed cor-
rectly when the window of the Support Tool is maximized. In this case, clear the
checkmark for [Always on top] at [Taskbar Options].
The standard toolbar, draw bar, utility bar and alignment bar can be moved as a
floating palette to a convenient place for your operation.
S Object information on the status bar
The information for the selected object that will be displayed on the status bar is
indicated in the following table. (No information will be displayed when multiple
objects are selected) Information to be displayed may be cut depending on the
resolution of the screen or the selected object.
Fixed Display {Object Name: Attribute}
*1
Mark Object {Code }
Image Object {Reference Type: Code
Library Object {Reference Type: Code
Image Lamp {PLC Address: ON code
ment}
Standard Lamp {PLC Address: Label
Touch Switch {Function: PLC Address: Label
Address, else display Lamp Address)
[View] (menu bar) [Status Bar]
[View] (menu bar) [Toolbars]
[View] (menu bar) [Toolbars]
[View] (menu bar) [Toolbars]
[View] (menu bar) [Toolbars]
Information to be displayed
*1
: Comment: Size: Compression}
*1
: Comment}
*1 *1
: OFF code : ON comment if check else OFF com-
*2
}
*2
} (If function type is Notify Bit, display Notify
Section 3-2
[Standard Bar]
[Draw Bar]
[Utility Bar]
[Alignment Bar]
[Settings]
43