Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 259

Graphs
Property setting
Data logging: Specify whether or not the data logging function is used.
Background:
General
Position: Indicates the display position of the trend graph.
(The reference point is at the upper left corner of the trend
graph)
Size: Indicates the size of the trend graph.
Display
Type: Specify the trend graph display type.
Standard, Pen Reco (pen recording)
Drawing Width: Specify the amount of graph shift when the display is updated.
Frame: Specify whether or not a frame is displayed for the trend graph.
Display Sign: Specify whether or not a display area for negative values is
displayed.
Direction: Specify the direction of trend graph movement.
Right (
Sampling Cycle: Specify the graph updating time interval.
NT30, NT30C, NT620S, NT620C, NT625C: 0.1 second unit
NT21, NT31, NT31C, NT631, NT631C:
Color
Frame: Specify the color of the trend graph frame if [Frame] is selected.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
+Range: Specify the color of trend graph displayed for a positive value.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
–Range: Specify the color of trend graph displayed for a negative value.
(Can only be set for PTs with color display.)
Valid only when [Display Sign] is selected.
White, black, blue, red, magenta, green, cyan, yellow
Settings
: Specify this when displaying multiple graphs (lines). The line
properties [Line] are displayed.
: Specify this when deleting a graph (line).
: Specify this when modifying a graph (line). The line properties
[Line] are displayed.
Logging Property (only for NT21, NT31, NT31C, NT631, and NT631C)
Specify whether or not the background function is used.
), Left ( ), Up ( ), Down (
0.5 second unit
Section 6-9
)
243