Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 569

Error Messages
T The total number of Numeral Table refer-
ences exceeds the overlapping screen's
limit of XXX by YYY.
The total number of String Table refer-
ences exceeds the overlapping screen's
limit of XXX by YYY.
The total number of touch switches ex-
ceeds the overlapping screen's limit of
XXX by YYY.
The total number of Trend graph frame
exceeds the overlapping screen's limit of
8 by XXX.
The total number of Trend Graph line
with Data Logging is ON exceeds the ap-
plication limit of 8 by YYY.
The total number of vertices in Broken
Line Graphs exceeds the overlapping
screen's limit of XXX by YYY.
This screen does not support XXX. It is
discarded.
Touch Switch function type is not sup-
ported. It is discarded.
Touch switch does not have associated
alarm object.
Y You have already started NT-series Sup-
port Tool.
Error Message Corrective Action
Reduce the number of reference elements.
Create the elements within the maximum
limit.
Create the touch switches within the limit.
Create the trend graphs within the limit.
Create the trend graphs within the limit.
Create the broken line graphs within the
limit.
Correct the system initialization screen so
that the same screen as before the con-
version is created using fixed display ele-
ments excluding image/library data.
Correct the position of the control touch
switch as needed.
Select the alarm touch switch on the
screen, choose [Draw] – [Associate], then
specify the element with which the se-
lected touch switch is to be associated.
To import screen data by starting up two
Support Tools, select [Import Component]
from the [File] menu.
Appendix K
553