Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 256

Graphs
240
To add a broken line, click on
properties are displayed for the added broken line. A maximum of 256 broken
lines can be created.
To delete a broken line, select the broken line to be deleted with the "Settings"
and click on
S The following four types of line are provided for displaying broken-line graphs.
Solid Dash
Set the line type with the [Style] property.
S The relationships between the points (vertices) in a broken-line graph and
numeral memory table contents are shown below.
When display direction is right
S The intervals between numeral memory table entries in a broken-line graph
can be set as even or uneven, as desired, with the [Interval Type] line property.
If you select even, the numeral memory table entries are displayed in equal
intervals.
Even intervals
If you select uneven, the intervals between numeral memory table entries can be
set as desired.
Click on , and the interval setting dialog box is displayed.
. A broken line is added and the line
. The specified broken line is deleted.
Dot-dash
Numeral memory table
30
70
50
88
28
67
Section 6-9
Dot-dot-dash
Start table entry number
Number of points
Set number of dots