Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 126

Common Operation
Specifying an element consisting of multiple elements
110
Drag the mouse cursor so that all elements will be enclosed by the range speci-
fying frame.
Range specifying frame
S Selecting all elements in a screen
To select all the elements arranged in a screen, use the select all function.
Select [Select All] from the [Edit] menu.
To edit an element that consists of multiple elements as shown below, use the
edit element function.
S Position of a label in a touch switch
S Position of a label in a standard lamp
S Position of a "Display %" in a bar graph
S Position of a "Display %" in an analogue meter
S Position of a "Display %" in a trend graph and touch switches for controlling
function
S Display position of image/library data and position of touch switches in an
alarm list/alarm history
(1) Select the element to be edited.
Select only one element, if multiple elements are selected, edit object func-
tion can not be used.
(2) Select [Edit] (menu bar), then select [Edit Object].
This operation is also possible using the pop-up edit menu; display the pop-
up edit menu by right clicking the mouse on the elements and select [Edit
Object] in the menu.
It is also possible to enter Edit Object mode by simply pressing the [Insert]
button on a keyboard.
(To cancel Edit Object mode, press [Insert] button again.)
The green J marks (handles) change into red.
(3) Select an element.
Section 6-1