Image Object Data - Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Fixed Display

6-2-9 Image Object Data

Note
Operation procedure
Terminology
152
S If "Full Tiling" is performed, performance of Support Tool may be slower. In this
case, clear the check mark for [Full Tiling] from the [View] menu.
S [Full Tiling] is automatically cancelled when a filter function is performed for a
Fixed Display.
S The Color Palette Symbol, for which tiling patterns and color combinations are
registered, is supplied with Support Tool as symbol data. Using color palette
symbol enables you to register required tiling objects on screen while checking
their display status. Color palette symbol does not have transparent back-
ground patterns. Border colors are set to 'White'. Change the setting as re-
quired when using it. For details, refer to 6-10-5 Operating Procedure of Color
Palette Symbol.
Image data is displayed.
There are two types of image data. One type of image data references the fixed
code directly, the other type uses indirect reference. Indirect reference is a func-
tion that can change the image data to be displayed by writing the image code to
the numeral table just like the indirect reference of numeral/string display. This
enables the animation display by switching the display contents using a simple
program. For details of the PT models that can use indirect reference, refer to
Appendix D Table of Functions of Each PT Model.
Image data cannot be used for NT11S/NT11, NT20, NT20S and NT600S.
(1) Image data created in the bit map (BMP) format is displayed.
Bit map data created by general application software running on Windows can be
displayed.
Selection using the menu bar:
Selection using the drawing toolbar:
Background color
Section
[Objects] [Fixed Display]
[Image Display]
Foreground color
6-2