ITW SIMCO ION 1034 Smart SLC IQ Easy 4 User Manual page 40

Log in
Log in
The Smart SLC has 4 user access levels:
• Basic (view only)
• Advanced (operator)
• Expert (supervisor)
• Admin (Administrator)
When you are logged in you can create and edit any user profile with a lower access level.
At first setup for the system log in as Admin
Default:
User : Admin
Password : (no password)
It is highly recommended to change the default Admin password and to make additional Admin
user(s) in case you forget the Admin password.
Recovery of Admin password:
Contact Simco-ION cs@simco-ion or ts@simco-ion to supply a recovery code.
The Admin user has access to additional settings needed for initial system configuration.
Create as many Basic, Advanced and Expert users as you want.
Passwords need to be at least 8 characters.
As administrator you can edit usernames and password after creation to modify if needed.
Basic users can only view the system and cannot change any settings of initiate actions.
Multiple Basic users can be logged in the system at the same time.
Advanced or Expert users has access to changing parameters or initiating actions. Only 1 Ad­
vanced or Expert user can be logged into the system.
When an Advanced or Expert user is logged in, the Administrator can also log in and change pa­
rameters, change status of objects or initiate actions.
Advanced users can change Object status (Run/Standby/Disable) and have access to a limited
number of parameters.
Expert users have access to all user relevant functions.
After the first log-in, check the system time.
In case you have connected the Smart_SLC to your company network with internet access, the
system time will be synchronised with a NTC time server.
40