Advertisement
Electrical installation
Check the wiring diagram :
Electrical wire connections
Connect Simco-ION IQ devices
Connect a Simco-ION IQ device to a port. Strip the 5 individual wires and terminate them with a
cable end sleeve.
Push the wired with cable end sleeve directly in to the correct position. The positions are colour
marked. The 5th wire is grounding and can be yellow/green or gray.
Use M12 cables female 5 pole with blunt end 0,34 mm² for cables up to 15 m. For longer ca
bles consult Simco-ION.
33
Advertisement
Need help?
Do you have a question about the SIMCO ION 1034 Smart SLC IQ Easy 4 and is the answer not in the manual?