Set Date And Time - ITW SIMCO ION 1034 Smart SLC IQ Easy 4 User Manual

Set Date and Time

All system logging and events are stored in UTC time.
When you have connected toe Smart_SLC with you company network that has internet acces, the
system time will be synchronised with an NTC time server.
In case you are using the Smart-SLC as a stand alone system the system time will be pre-set at
the Simco-Ion factory and you will have to check and correct.
Installing Addition SLC's
Each SLC has an integated clock. The clock is preset by Simco-Ion to UTC time.
When replacing or adding Addition SLC's plug in the Simco-LAN cable in when the system has
power and is running. In that case the new additions will automatically get the system time of the
running Smart_SLC and will be ecognised by the system.
In case you have plugged in the Additions during power down, you will have to chech the system
time in case the system is not connected to the internet.
Set system time:
Click on the clock in the header.
The current system time should alway be UTC time!
Set new date and system time if neccessary.
52