Extech Instruments BR450W-D User Manual page 3

RoHS NOTICE
This system is in conformance with the requirements of the European law on the Re-
striction of Hazardous Substances (RoHS) directive. This means that our product is
both lead-free and without the hazardous substances either in the manufacturing proc-
ess or in the final product.
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) This device may not cause harmful interference. (2) This device
must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the re-
ceiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the party responsible for com-
pliance could void the user's authority to operate the equipment.
SAR Warning Statement
This device meets the government's requirements for exposure to radio waves. This de-
vice is designed and manufactured not to exceed the emission limits for exposure to ra-
dio frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government. The exposure standard employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for
SAR are conducted using standard operating positions accepted by the FCC with the
EUT transmitting at the specified power level in different channels. The highest SAR val-
ue for the device as reported to the FCC is 0.68 W/kg when placed next to the body or
on hand with a minimum of 0 mm separation from the body.
#NAS100203; r. AC/97487/97487; en-US
2