Table of Contents
Advertisement
Operating Procedures
■ Initial Settings
K-20
1/32 DIN Digital Panel Meter
Power ON
Press the Level Key @ for 3 s min. to move to the initial setting
level.
Select the input type and specify the analog input range or
pulse frequency input range.
Set the scaling values and specify output operating action as
required.
With communications output models, press the Level Key @ for
less than 1 s to move to the communications setting level.
After making communications settings, press the Level Key @
for less than 1 s to move to the initial setting level.
Move to the advanced function setting level and make settings
for average processing, HOLD/ZERO selection, hysteresis val-
ues, auto-zero time, startup compensation time, display color
programming, and other advanced function parameters as re-
quired.
Press the Level Key @ for less than 1 s min. to return to the
operation level.
Specify set value of OUT 1 and 2.
Measurement starts.
K3GN
Advertisement
Table of Contents
