Omron K3GN - V1.03 Manual page 10

Nomenclature
2. Status indicators
3. Level indicator
Name
1. Main display
2. Status indicators
3. Level indicator
4. Level Key
5. Mode Key
6. Shift Key
7. Up/Zero Key
Level indicator
p Protect
Not lit Operation
a Adjustment
Initial setting
s
Communications setting
c
Advanced function setting
f
User calibration
u
K-16
1/32 DIN Digital Panel Meter
4. Level key
Displays process values, parameters, and set values.
OUT1 Lit when output 1 is ON.
OUT2 Lit when output 2 is ON.
SV Lit when a set value is being displayed or changed.
T Lit when the teaching function is enabled. Flashes when the K3GN is in teaching operation.
Lit when a calibration value is being displayed during user calibration. Flashes while reading a calibra-
tion value.
ZERO Lit while the forced-zero function is activated.
HOLD Lit when HOLD input is ON.
CMW Lit when communications writing is "enabled" and is out when it is "disabled."
Displays the current level that the K3GN is in. (See below for details.)
Used to change the level.
Used to allow the Main display to indicate parameters sequentially.
Used to enable that set value to be changed. When changing a set value, this key is used to move
along the digits.
Used to change a set value. Used to set or clear a forced-zero function when a measurement value is
being displayed.
Level
K3GN
1. Main display 2. Status indicators
5. Mode key 6. Shift key
Functions
7. Up/Zero key