Omron K3GN - V1.03 Manual page 15

■ Levels
"Level" refers to a grouping of parameters. The following table lists the operations that are possible in each of the levels, and how to move between
levels. There are some parameters that are not displayed for certain models.
Level name
Protect
Operation
Adjustment
Initial setting
Communications setting
Advanced function setting
Calibration
Protection
Indicates change of level.
Note: The move to protection level time can be set in the advanced function setting level.
Function
Setting lockouts.
Displaying process values, setting/clearing forced-zero function, and
setting OUT 1/2 set values.
Setting communications writing control.
Making initial settings of input type, scaling, output operating action,
and other parameters.
Setting baud rate, word length, and other communications data.
Setting average processing, display color settings, and other ad-
vanced function parameters.
Setting user calibration of the inputs.
Power ON
Operation
+
Time set
by user
(see note)
1 s min.
+
1 s min.
Initial setting
1 s min.
Advanced function
setting
Calibration
Adjustment
Less than 1 s
Flashing stops if key
1 s min.
is released.
-1234.5
Continue to press the key for 2 s min.
Communications
setting
Less than 1 s
Password " 0169"
Password "1201"
1/32 DIN Digital Panel Meter
Measurement
Continue
Continue
Continue
Stopped
Stopped
Stopped
Stopped
K3GN
K-21