Omron H5S Datasheet page 6

Digital time switch
Hide thumbs Also See for H5S:
Table of Contents

Advertisement

Item
Weekly 2-circuit Models (H5S-W@2)
Checking the
Consecutively displays the times when the output is set to turn ON and OFF for one day in the sequence in which the Time
settings
Switch is to operate.
For details, refer to Checking the Settings on page 21.
Forced ON/OFF
Allows the output to be forcibly turned ON/OFF by the Output ON/OFF Switch regardless of the control output setting.
operation
Override and
Allows the control output to be maintained in the ON (or OFF) state until the next OFF (or ON) time. This operation is controlled
automatic
by using the Output ON/OFF Switch and Write Key. When completed, the Time Switch automatically resumes the previously
return
set operation.
operation
For details, refer to Override and Automatic Return Operation on page 22.
Summertime
Switches the current time from "current time" to "current time + 1 h" for daylight savings time. Yearly models also offer automatic
(DST)
switching to daylight savings time.
adjustment
For details, refer to Manual Summertime (DST) Adjustment on page 21.
Time counter/
Displays the total elapsed time and total count of external input. It also displays a
total counter
warning when a set value is entered.
display
For details, refer to Total Time/Count Display on page 23.
Time
Allows the time to be set to 00 min 00 s at the same time as an external input is
adjustment
applied.
input
For details, refer to Time Adjustment Input Function on page 24.
Manual
Allows the output state to be specified following recovery from a power failure.
operation on
For details, refer to Manual Operation on Recovery from Power Failure on page 24.
recovery from
power failure
Bank switching Allows two groups (banks) of programs to
be registered and switched by external
input.
For details, refer to Bank Switching on
page 24.
Season
---
switching
Power OFF
Allows the display to remain lit even when the power is turned OFF, and settings to be made for all functions except Override
settings
and Automatic Return Operation.
• The display illumination will turn OFF when there has been no operation for 2 min. The display will light again when any key
other than a slide switch is pressed for at least 1 s.
• No output will be generated.
6
Digital Time Switch
Yearly 2-circuit Models (H5S-Y@2)
---
Allows weekly programs to be automatically switched in response to seasons
throughout the year.
For details, refer to Season Switching on page 24.
H5S
Yearly 4-circuit Models (H5S-Y@4)
---
---
---

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents