Omron H5S Datasheet page 7

Connections
■ Terminal Arrangement
H5S-@A@/-@B@ Flush Mounting Models
(2-circuit models)
Output 2
(Rear View)
A
+
∼
Power
source
H5S-@FA@/-@FB@ Surface Mounting Models
(2-circuit models)
Input
F G H I
(Front View)
Note: 1. The Time Switch output uses a no-voltage contact. An external power supply is required for applications in which a load is driven.
2. The output contact ratings are different for 2-circuit and 4-circuit models.
■ Input Connection (2-circuit Models Only)
Use a switch or relay as the input contact.
Use a contact that is capable of operating with 5 V, 0.1 A (with a minimum signal input width of 100 ms).
Flush mounting models
(H5S-@A2@/-@B2@)
Surface mounting models
(H5S-@FA2@/-@FB2@)
Note: Input must be selected using the "F2: Input selection" step of initial setting mode. For details, refer to Using Advanced Functions on page 23.
Input
G H I J
B C D
−
∼
Output 1
Output 2
B C D E
− +
∼ ∼
Output 1 Power
source
I J
F G
(4-circuit models)
Output 2 Output 3
F
(Rear View)
A
+
∼
Power
source
(4-circuit models)
Output 4
(Front View)
Digital Time Switch
Output 4
G H I J
D
B C E
−
∼
Output 1
Output 3 Output 2
F G H
I J
A
B C
D E
− +
∼ ∼
Output 1 Power
source
H5S
7