Omron H5S Datasheet page 15

Ordinary Timer Operation
Weekly, 2 Circuits Yearly, 2 Circuits
Example: ON at 8:30 and OFF at 17:15 on Monday through Friday.
SUN MON TUE WED
8:30 17:15 8:30 17:15 8:30 17:15 8:30 17:15 8:30 17:15
1. Set the Mode Switch to P1 or P2. *1
(The Time Switch enters program
setting mode.)
→ For 4-circuit models, refer to
page 18.
TIMER
P1
P2
PULSE
RUN
2. Press the Day Keys to turn ON the
bars ( ) at the positions of Monday
through Friday.
Set the ON time with h and
3. Press WRITE .
Set the OFF time with h and
4. Press WRITE to enter the settings.
*1 If one or more programs have already been set, the display
starts showing the set programs.
To add another program, press
is displayed.
*2 Holding down the h and
Pressing decrements the value of the key that was last
pressed.
Note:
• If multiple settings are required, repeat steps 2 through 4.
• Both the ON and OFF times must be set.
• All of the weekly programs for the selected circuit (output) can be
checked by pressing WRITE
• When the Mode Switch is set to P1 or P2 (to PRGM for 4-circuit
models), the Time Switch stops automatic operation. To forcibly
turn ON or OFF the output, use the Output ON/OFF Switches.
• The set data will be cleared if the Output Setting Switch is moved
between the TIMER and PULSE positions after the data has been
set.
Yearly, 4 Circuits
THU FRI SAT
Number of
Shaded portion
remaining steps
indicates blinking of
the indicator.
SUN MON TUE WED THU FRI SAT
m . *2
SUN MON TUE WED THU FRI SAT
m . *2
SUN MON TUE WED THU FRI SAT
repeatedly until "--:--"
WRITE
m Keys rapidly advances the value.
in program setting mode.
Multiple-day Operation 1
Weekly, 2 Circuits Yearly, 2 Circuits
Example: ON continuously from 8:30 on Monday to 17:15 on Friday.
SUN MON TUE WED
8:30
1. Set the Mode Switch to P1 or P2.*1
(The Time Switch enters program
setting mode.)
→ For 4-circuit models, refer to
page 18.
TIMER
P1
P2
PULSE
RUN
2. Press the Day Keys to turn ON the
bar ( ) at the Monday position.Set
the ON time with h and m
3. Press WRITE .
MON
Press to flash the bar (
all day positions and press
turn ON the bar ( ) at the Friday
position.
Set the OFF time with h and
4. Press to enter the settings.
WRITE
*1 If one or more programs have already been set, the display
starts showing the set programs.
To add another program, press
is displayed.
*2 Holding down the h and
Pressing decrements the value of the key that was last
pressed.
Digital Time Switch
Yearly, 4 Circuits
THU FRI SAT
17:15
Number of
Shaded portion
remaining steps
indicates blinking of
the indicator.
SUN MON TUE WED THU FRI SAT
. *2
SUN MON TUE WED THU FRI SAT
) at
FRI to
SUN MON TUE WED THU FRI SAT
m . *2
WRITE repeatedly until "--:--"
m Keys rapidly advances the value.
H5S
15