Omron H5S Datasheet page 25

Period of Season (F9)
Shaded portion indicates
blinking of the indicator.
1. Press
2. Press
3. Press
4. Press
Note:
• The following is set as the default period of season.
A: 1.1 to 12.31 (1/1 to 12/31)
B to D: --.-- to --.-- (no setting)
*The "C" and "D" indications are not displayed in 2-circuit models.
• If overlapping periods are set, the priority becomes A<B<C<D.
For example, setting A (1/1 to 12/31) and B (4/1 to 9/30) will result in the
following: 1/1 to 3/31: A, 4/1 to 9/30: B, 10/1 to 12/31: A.
Switching seasons
One group of programs is automatically switched to another,
according to the seasons set in initial setting mode.*
* The season switching functions apply only to weekly programs, not
yearly programs.
Programming a season
Press TIME ADJ in program setting mode to switch seasons.
Different weekly programs can be set for each season.
Next Operation Display (F1)
Weekly, 2 Circuits Yearly, 2 Circuits
The order of the output channels for which the next operation (the
next ON or OFF time) is set can be selected for the sub-display.
This function is useful when an operation in a particular circuit is to
be monitored.
Parameters
only 1 - - - - - - - - - - Displays the next operation for circuit 1 only.
only 2 - - - - - - - - - - Displays the next operation for circuit 2 only.
only 3 - - - - - - - - - - Displays the next operation for circuit 3 only.
only 4 - - - - - - - - - - Displays the next operation for circuit 4 only.
all 1234 - - - - - - - - Displays the next operation for all circuits.
Note: 1. Circuits 3 and 4 are not displayed for 2-circuit models.
2.
The inverted characters
Setting method
Shaded portion indicates
blinking of the indicator.
1. Select one of the parameters using
2. Press
h m
or to select the desired
season.
WRITE to enter the setting.
The display then changes to the start
period of season input screen. Press
M or D to designate the starting
date.
WRITE to enter the setting.
The display then changes to the end
period of season input screen. Press
M or D to designate the ending
date.
to enter the setting.
WRITE
Yearly, 4 Circuits
indicate the default.
or .
h m
to enter the setting.
WRITE
Date Format Selection (F5)
Yearly, 2 Circuits Yearly, 4 Circuits
The displayed date format is selectable between "month. day" and
"day. month".
Parameters
: "month. day"
mm.dd
dd.nn: "day. month"
Note: indicate the default.
The inverted characters
Setting method
Shaded portion indicates
blinking of the indicator.
1. Press
parameters.
2. Press
Summer Time (DST) Adjustment (F6)
Yearly, 2 Circuits Yearly, 4 Circuits
Manual or automatic summer time adjustment can be selected.
Parameters
: Manual adjustment
off
auto: Automatic adjustment (Select summer time schedule in F7.)
Note: indicate the default.
The inverted characters
Setting method
Shaded portion indicates
blinking of the indicator.
1. Press
parameters.
2. Press
Digital Time Switch
h or m to select one of the
to enter the setting.
WRITE
h m
or to select one of the
WRITE to enter the setting.
H5S
25