Omron H5F Datasheet

Digital daily time switch

Hide thumbs Also See for H5F:

Instruction manual (36 pages)

Manual (326 pages)

User manual (8 pages)

Table Of Contents

Digital Daily Time Switch

H5F

Daily Time Control with Simple Operations

(Operation Day Selection Possible)

• Up to 12 ON/OFF operations (24 for pulse-output operation).

• Special holidays can be handled easily with the holiday setting

function.

• Adjustments for sudden schedule changes can be made easily

using output override and automatic return operation.

• The operation program can be checked easily with the program

check function.

• Enables pulse output operation and summer time setting.

• Incorporates finger-safe terminals.

• Conforms to UL, CSA, and CE marking.

• Meets a variety of mounting requirements: flush mounting, sur-

face mounting, and DIN track mounting.

Model Number Structure

Model Number Legend

H5F-@B

1 2

1. Mounting method

None:

Flush mounting

Surface mounting

Surface mounting/track mounting

2. Language

English

Ordering Information

List of Models

Wiring

Screw terminals

Accessories (Order Separately)

Soft cover

Hard cover

Flush Mounting Adapter (See note 2.)

Mounting Track

End Plate

Spacer

Note: 1. Supplied with H5F-KB model.

2. Supplied with H5F-B (flush-mounting) model.

Mounting method

Flush mounting

Surface mounting

Surface mounting/track mounting

Name

For H5F-B

For H5F-FB/-KB

50 cm (l) ´ 7.3 mm (t)

1 m (l) ´ 7.3 mm (t)

1 m (l) ´ 16 mm (t)

Model

H5F-B

H5F-FB

H5F-KB

Models

Y92A-48F1

Y92A-48

Y92A-48E (See note 1.)

Y92F-30

PFP-50N

PFP-100N

PFP-100N2

PFP-M

PFP-S

Digital Daily Time Switch

H5F

Table of Contents

Summary of Contents for Omron H5F

Page 1: Ordering Information
Daily Time Control with Simple Operations (Operation Day Selection Possible) • Up to 12 ON/OFF operations (24 for pulse-output operation). • Special holidays can be handled easily with the holiday setting function. • Adjustments for sudden schedule changes can be made easily using output override and automatic return operation.
Page 2: Specifications
Influence of temperature Monthly difference ± 15 s (at 25 ° C) Cyclic error Continuous use: 5 years min. (at 25 ° C); Power-interruption rate of 50%: 10 years min. (at 25 ° C) (see note 2) Memory protection (lithium battery) 100 M W min.
Page 3: Terminal Arrangement
Operation 1. Daily operation (Multiple-day operation possible.) 2. Pulse-output operation (Pulse width can be set in units of 1 s from 1 to 59 s and in units of 1 min from 1 to 60 min.) 3. Partial operation on specified day (One or some of the operations for certain days can also be executed on other days.)
Page 4: Operation Functions
Pulse-output operation Output turns ON for a fixed period (pulse width) at the set time. • Pulse width: 1 to 59 s, or 1 to 60 min. (The same pulse width setting is used for all types of Pulse width output operation.)
Page 5: Front Panel
Sets minutes or a pulse time width. WD (Minute/Pulse Time Width) Key Write Key Writes the set data to memory or confirms settings with the program check function. d/Test (Day Shift/Program Test) Key Moves the cursor to specify a day or starts the program check function.
Page 6: Surface Mounting
(sold separately) M4 tapping screws provided. Approximate pilot hole dimensions: Note: The Time Switch Terminal cover Panel thickness of 0.8 to 1.2 mm: 3.6 mm dia. uses M3.5 (provided) terminals. Panel thickness of 1.6 to 4.0 mm: 3.7 mm dia.
Page 7 Accessories (Order Separately) Note: Depending on the operating environment, resin products may deteriorate, contract, or harden. They must be replaced on a regular basis. Soft Cover Hard Cover (provided with H5F-KB) Y92A-48F1 Y92F-48 (for H5F-B) Y92A-48E (for H5F-FB/-KB) Settings can be changed by pressing on the front of the Cover. The settings are harder to change, however, with the Cover mounted.
Page 8: Operating Environment
• Store at the specified temperature. If the H5F has been stored at a Circuit temperature of less than - 10 ° C, allow the H5F to stand at room temperature for at least 3 hours before use. • This Time Switch is not waterproof or oil-proof. Do not use it in locations where water or oil may enter the Time Switch interior.
Page 9 Precautions for EN61010-1 Conformance The H5F Time Switch conforms to EN61010-1 provided that the fol- lowing conditions are satisfied: Basic insulation is provided between the power supply and output terminals of the H5F. • Output terminals are connected to devices without exposed charged parts.
Page 10: Operating Method
MODE Note: 1. The set time is enabled when the Key is pressed. WRITE 2. The time can be displayed in either 12-hour (am/pm) or 24- • Set the present day Time Adjustment Mode hour display. (Refer to page 14.) and time.
Page 11 Note: 1. Up to 12 sets of ON-OFF settings are possible. 2. Be sure to set both ON and OFF times. If only the ON time is set, the setting will be invalid. 3. At the time of delivery, all days are set as operation days.
Page 12 Key. Move the WRITE The Time Switch can be set to operate according to only some of the present day indicator to Sunday settings on a user-specified day. using the Key. Clear the...
Page 13: Clearing All Settings
1. Enter operation time setting mode The color indicates flashing or operation date setting mode SU MO TU WE TH FR SA Note: Operation based on the changed settings will start as soon as using the Key. MODE the Time Switch returns to run mode.
Page 14 The 3. Press the Key. The Time output status can be set to ON or OFF directly using the output ON/ HOLIDAY SU MO TU WE TH FR SA Switch will enter run mode and the OFF switch.
Page 15 Program Check Function Using Override and Automatic Return Operation for The days and times at which output turns ON or OFF over the course Pulse-output Operation of one week can be displayed continuously in the actual order in Override and automatic return operation proceeds in the following which they will occur.
Page 16: Setting Examples
): Tuesday, Wednesday, Thursday, Friday ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. L015-E1-04 In the interest of product improvement, specifications are subject to change without notice.

This manual is also suitable for:

H5f-b H5f-fb H5f-kb

Omron H5F Datasheet

Table of Contents

Ordering Information

Related Manuals for Omron H5F

Summary of Contents for Omron H5F

This manual is also suitable for:

Table of Contents