Table of Contents
Advertisement
Quick Links
Enclosed Switch
D4MC
Economical, High Utility Enclosed Switch
■ Enclosed Switches with Built-in Basic Switches for High
Repeatability and Durability of 10 Million Operations Minimum.
■ Panel mount versions have the same operating position as
Z Basic Switch.
■ Suitable for applications demanding higher mechanical
strength, dustproof and drip-proof properties than those
on basic switches.
■ Resin molded terminal versions are available.
■ Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on
approved models.)
Be sure to read Safety Precautions on page 5 and
Safety Precautions for All Limit Switches.
Model Number Structure
Model Number Legend
D4MC-
(1)
(1) Actuator
5000: Panel mount plunger
5020: Panel mount roller plunger
5040: Panel mount crossroller plunger
1000: Hinge lever
1020: Short hinge lever
2000: Hinge roller lever
2020: Short hinge roller lever
3030: One-way action short hinge roller lever
Specifications
Approved Standards
Agency
Standard
UL
*
UL508, CSA C22.2 No.14
CCC(CQC)
GB14048.5
Note: Ask your OMRON representative for information on approved models.
* UL certified for CSA C22.2 No. 14.
http://www.ia.omron.com/
Ordering Information
Panel mount plunger
Panel mount roller
plunger
Panel mount
crossroller plunger
Hinge lever
Short hinge lever
Hinge roller lever
Short hinge roller
lever
One-way action short
hinge roller lever
Note: 1. Use Switches with molded terminals in locations subject to dirt, dust, oil
File No.
E76675
2003010303077627
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Actuator
drops, or high humidity. Models are available with lead wires on the
right, on the left, and from the bottom.
2. Contact your OMRON representative for information on models
certified for international standards.
Model
D4MC-5000
D4MC-5020
D4MC-5040
D4MC-1000
D4MC-1020
D4MC-2000
D4MC-2020
D4MC-3030
1
Advertisement
Table of Contents
Related Manuals for Omron D4MC-5000
Summary of Contents for Omron D4MC-5000
- Page 1 Approved Standards Agency Standard File No. UL508, CSA C22.2 No.14 E76675 CCC(CQC) GB14048.5 2003010303077627 Note: Ask your OMRON representative for information on approved models. * UL certified for CSA C22.2 No. 14. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.
- Page 2 Ambient operating temperature Ambient operating humidity 35% to 95%RH Weight Approx. 71 g (in case of panel mount plunger) *1. Only for models with plungers. (Contact your OMRON representative for 0.01 0.02 0.05 0.1 5 10 information on other models.) OT (mm) *2.
- Page 3 0.2 mm 0.2 mm 3 mm 1.7 mm 3 mm Free Position 36 mm 33 mm 51 mm max. Operating Position 21.8±1.2 mm 33.4±1.2 mm 33.4±1.2 mm 25±1 mm 25±1mm 40±1 mm http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.
- Page 4 10.5 dia. Red: NC Note: Add the VCT length to the end of the model number when ordering. Consult with your OMRON representative for other types of lead wires and for lead wires longer than 3 m. How to Order...
-
Page 5: Safety Precautions
(SiO ) due to arc energy. If silicon oxide accumulates on the • When mounting the Panel Mount-type Switch (D4MC-5000, D4MC- contacts, contact interference can occur. If silicon oil, silicon filling 5020, or D4MC-5040) with screws on a side surface, remove the agents, silicon cables, or other silicon products are present near the hexagonal nuts from the actuator. -
Page 6: Precautions For Safe Use
Limit Switch itself may become damaged or burnt. Precautions for Correct Use For details, refer to Precautions for Correct Use in the Technical Guide for Limit Switches. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. - Page 7 • If the load is a minute voltage or current load, use a dedicated Switch for minute loads. The reliability of silver-plated contacts, which are used by standard Switches, will be insufficient if the load is a minute voltage or current load. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.
- Page 8 = 0.5 × 10 –6 /operations indicates that the estimated malfunction rate is less than 1/2,000,000 operations with a reliability Unusable range level of 60%. 1 mA 100 mA 160 mA 1,000 Current (mA) http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.
-
Page 9: Operating Environment
Otherwise, sulfuric film will be generated on the contacts and contact failures may result. Use the Switch with gold- plated contacts or use a dedicated Switch for minute loads instead. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. -
Page 10: Operation
(including the environment and operating frequency) to If the dog touches the lever as shown below, the operating position confirm that no problems will occur in actual. will not be stable. Incorrect Correct http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. - Page 11 • When using a pin-plunger actuator, make sure that the stroke of the actuator and the movement of the dog are located along a single straight line. Incorrect Correct Operating Operating body body http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.
- Page 12 0.5 to 0.7 (TT) Note: The above y values indicate the ratio ranges based on TT (total travel). Therefore, the optimum pressing distance of the dog is between 50% and 80% (or 50% and 70%). http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.
-
Page 13: Maintenance And Repairs
Therefore, reset may be delayed or reset may fail if the Switch is used with the actuator continually pressed in. Contact your OMRON representative if the Switch is to be used for this type of environment or application. - Page 14 Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specifi ed) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS.