Omron G3PW - MANUAL 2 User Manual page 89

Frame Configuration
End Codes (CompoWay/F Communications)
74
End code Name
"0F" FINS command error The specified FINS command could not be executed.
"10" Parity error
"11" Framing error
"12" Overrun error
"13" BCC error
"14" Format error
"16" Sub-address error
"18" Frame length error
"00" Normal completion
Description
The OR of 1 bits in received data does not match the set-
ting for the communications parity.
Stop bit is "0".
The next data was received when the reception data buffer
was full.
The calculated BCC value is different from the received
BCC value.
The FINS-mini command text contains characters other
than 0 to 9 and A to F. For details on the echoback test,
refer to 6-10 Echo-back Test.
SID and the FINS-mini command text are not included.
The sub-address is not included.
The received frame exceeds the required number of bytes.
Command processing was completed normally.
Section 6-2