Omron G3PW - MANUAL 2 User Manual page 56

Procedures for Operation and Setting Parameters
Parameter Settings
Operation Level
Power ON
Monitor level
0
0
ADJ SET EV
%(IN)
%(DIST)
%(OUT)
%(PHASE)
A
COMM
The indicator for the unit will light.
LVL
Adjustment level
i n p
ADJ SET EV
%(IN)
%(DIST)
%(OUT)
%(PHASE)
A
COMM
The ADJ indicator will light.
• The level when power is turned ON is the monitor level. Normal operation
is performed in the monitor level.
• Press the LVL Key to move to the adjustment level. In the adjustment
level, parameter settings can be changed during operation. Press the LVL
Key again to return to the monitor level.
• While in the monitor level or the adjustment level, press the LVL Key for at
least 2 s to move to the initial setting level. Then make the parameter set-
tings in the initial setting level. In this level, power to the load is turned
OFF.
• Press the LVL Key for at least 2 s to return to the monitor level from the
initial setting level. It is not possible to directly return to the adjustment
level from the initial setting level.
(Press for at least 2 s.)
LVL
Initial setting level
p 0
1
LVL
%(IN)
(Press
%(DIST)
for at
%(OUT)
least 2 s.)
%(PHASE)
A
COMM
The SET indicator will light.
Section 4-5
ADJ SET EV
41