Omron G3PW - MANUAL 2 User Manual page 80

Communications Settings
Communications Settings in the Initial Setting Level
Display Parameter
p19
Communications Unit Number 0 to 99
p20
Communications Baud Rate
p21 Communications Data Length 7: 7 bit
p22
Communications Stop Bits
p23
Communications Parity
p24
Send Wait Time
p25
Communications Main Set-
ting Number
p26
Communications Timeout
Time
Note
9.6: 9.6 k bit/s
19.2: 19.2 k bit/s
38.4: 38.4 k bit/s
57.6: 57.6 k bit/s
8: 8 bit
1: 1 bit
2: 2 bit
non: None
evn: Even
odd: Odd
0 to 99 ms
Connection to an OMRON EJ1 Modular Temperature Controller
0: Automatic assignment (recommended) (Default)
1: CH1 control output (heating)
2: CH2 control output (heating)
3: CH3 control output (heating)
4: CH4 control output (heating)
5: CH1 control output (cooling) (See note.)
6: CH2 control output (cooling) (See note.)
7: CH3 control output (cooling) (See note.)
8: CH4 control output (cooling) (See note.)
Connection to an OMRON PLC
1: Automatic assignment (Fixed)
0: Communications timeout function disabled
0 to 999 s
(1) Refer to 6-4 Services and Addresses for the notation used for set values
in communications.
(2) The following MV will be sent from the EJ1 to the G3PW Unit regardless
of whether the control method is set to standard or heating/cooling con-
trol. The MV (manipulated variable) sent from the EJ1 is used as the input
variable by the G3PW.
TC4
CH1 Control Output (Heating)
CH2 Control Output (Heating)
CH3 Control Output (Heating)
CH4 Control Output (Heating)
CH1 Control Output (Cooling)
CH2 Control Output (Cooling)
CH3 Control Output (Cooling)
CH4 Control Output (Cooling)
• When standard control is being used, the Channel 1 to 4 control outputs
for cooling are set to 0.0%.
• With a TC2, the Channel 3 and 4 control outputs for heating and cooling
are set to 0.0%.
Setting range
G3PW
CH1 Control Output (Heating)
CH2 Control Output (Heating)
CH3 Control Output (Heating)
CH4 Control Output (Heating)
CH1 Control Output (Cooling)
CH2 Control Output (Cooling)
CH3 Control Output (Cooling)
CH4 Control Output (Cooling)
Section 6-1
Default
1
57.6 k bit/s
7 bit
2 bit
EVN: (EVEN)
1 ms
0
1
10 s
65