Omron G3PW - MANUAL 2 User Manual page 30

Nomenclature and Operations
Operation Keys
Key symbol Name
LVL (Level) Key
LVL
ENT/RST (Enter/
ENT
Reset) Key
RST
UP Key
DOWN Key
Command Input and Power Supply Terminal Block
Load Terminal Block (Under Protective Cover)
Description
Level Changes
• Monitor level ↔ Adjustment level
• Monitor level ↔ Initial setting level
• Software is reset when moving from
the initial setting level to monitor
level.
Set value display
Set value change and entry
Error reset
Set value change
Monitor item/set value number change
1
1. 1 to 5-V input
2. 4 to 20 mA input
3. Current/voltage input COM
4. 100 to 240 VAC
5. 100 to 240 VAC
Load circuit output terminal (T1)
Load circuit output terminal (L1)
Enabling condition
Changing from monitor level to adjust-
ment level or from monitor level to ini-
tial setting level is possible even when
an error occurs.
In the monitor level, the ENT/RST Key
functions as a Reset Key only when an
error occurs. (It does not function as a
Reset Key when there is no error.)
---
2 3 4 5
N
L
T1 L1
Section 2-2
15